The Smart Sonic Model 1500 Stencil and Pallet Cleaner offers a very affordable alternative to the surface mount assembler requiring high quality, EPA compliance, flexibility and guaranteed performance.
The Model 1500 features the following:
Most importantly, the Model 1500 with 440-R SMT Detergent has the Smart Sonic performance guarantee that it will clean any type of solder paste from any fine-pitch stencil... or your money back!
The economical price of the Model 1500 makes it ideal if more than one cleaner is required. Dollar for dollar, the Model 1500 is the best value in ultrasonic stencil and pallet cleaning.
With Smart Sonic, you always have the choice of using the best chemistry, 440-R SMT Detergent, in our proven, certified and guaranteed stencil cleaning process. Or, select another chemistry and design your own process. Either way, Smart Sonic has been used longer, by more SMT assemblers and recommended by more stencil manufacturers than any other stencil cleaning process.
|Overall Dimensions||26.5" x 41.25" x 34.0"H|
|Wash Tank Dimensions||9" x 31" x 25"H|
|Wash Tank Capacity||26 gallons (98 liters)|
|Maximum fame size||29" x 29" with one cycle*|
29" x 50" with two cycles
|120 V, 1 Ph, 6 Amps|
|220-240 Volt, 1 Phase, 20 Amps|
|40 PSI (Soft or DI Water)|
|Average Cycle Time|
|1 - 2 minutes|
|2 - 3 minutes|
|2 - 4 minutes|
|2 - 5 minutes|
|440-R SMT Detergent|
|RA solder paste||10 - 12%|
|RMA solder paste||10%|
|No Clean||6 - 12%|
|Synthetic flux (AP-4000, UP-78)||6 - 12% at 90°F (32°C)|
|Water washable solder paste||0 - 2%|
|SMD Adhesives||10% at 90°-110°F (32°-43°C)|
|Post solder flux buildup (rosin)||10% at 90°-110°F (32°-43°C)|
|Post solder flux buildup (OA)||1 - 2% (may require heat)|
|Hybrid Inks||Consult factory|
Specifications are subject to change without notice.
* Wash tank depth is 25". The non contaminated end (approx. 5") of a 29" stencil will not be immersed to serve as a "handle" to move stencil from wash to rinse tank.